PSG AUDIO KW181A

1000 Watts sub amplifier module (Replacement for qsc kw181)

$299.99

Product Description

    • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output

    • Extensive DSP enhances system performance

    • DMT(Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural “dead” or “hot” frequency zones.

    • Intrinsic Correction, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time,  frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.  

    • DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.

    • GuardRail protection protects both the amplifier module and your performance from unnatural and destructive clipping.

Power Output21000 W continuous Class D
(1000 W LF)
2000 W peak
Input ImpedanceXLR / ¼”: 40 kΩ balanced / 20 kΩ unbalanced
ControlsPower, Mode (Normal/BOOST), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off), Gain
IndicatorsPower, Signal, Standby, Limit
ConnectorsBalanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
CoolingOn demand, 50 mm variable speed fan
Amplifier ProtectionThermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer ProtectionThermal limiting, excursion limiting
AC Power InputUniversal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A

User Manual

User Manual

 

  • PSG AUDIO KW181A Amp Module
  • Power Cable

Images

Where to buy